Home > Support > Material Safety Data Sheets

Material Safety Data Sheet

Date: May. 19, 2018

SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

 

PRODUCT NAME: Solvent

MANUFACTURER’S NAME: Shangdong Deture Jetink Technology Co.Ltd

ADDRESS: No.50 Changsong Road, Weifang, Shangdong, China

EMERGENCY PHONE: +86-536-5076866

FACSIMILE: +86-536-5076889

MSDS NUMBER: 06008

MSDS DATE: 13th Jan.2013

 

SECTION 2 COMPOSITION INFORMATION

                               

COMPOSITION: Mixture

PRODUCT NAME: Solvent

                 INGREDIENT                 CONCENTRATION      CAS NO.

     Ethylene Glycol Monobutylether Acetate               <80%           112-07-2

               Cyclohexanone                           <20%           108-94-1

               Glycol ether DPM Acetate                  <10%         88917-22-0

 

   

 SECTION 3 HAZARD IDENTIFICATION

                    

 

Hazards Identification: This substance is considered to be non-hazardous for transport

Emergency Overview

May irritate to eyes, skin and respiratory system, Avoid inhalation and contact

 

SECTION 4 FIRST-AID MEASURES

EYE CONTACT: In case of eye contact, immediately flush with plenty of water for at least 15 minutes.

SKIN CONTACT: In case of skin contact, flush with plenty of water for at least 15 minutes.

INHALATION: If symptoms develop, immediately to move individual away form exposure to fresh air. Seek medical attention. Keep individual warm and quiet. If breathing is difficult administer oxygen.

INGESTION: In case of ingestion, DO NOT induce vomiting, CALL A PHYSICIAN, contact a poison control center.


SECTION 5 FIRE-FIGHTING MEASURE

           

Extinguishing Media:

Suitable: Water spry, carbon dioxide, dry chemical powder or appropriate foam.

Firefighting:

Protective Equipment: Wear Self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

Hazardous Decomposition Products: CO, CO2

 

SECTION 6 ACCIDENTAL RELEASE MEASURES

 

Procedures of Personal Precautions:

Wear appropriate protective clothing to minimize direct contact with skin or eyes and prevent inhalation.

Mathods for cleaning up:

Mix with inert material(eg. Dry sand, vermiculite) and transfer to sealed container for disposal. Ventilate area and wash spill site after material pickup is complete.

 

 SECTION 7 HANDLING AND STORAGE

                  

Handing

User Exposure: Use protective clothing and gloves. Avoid inhalation. Avoid contact with eyes, skin and clothing. Avoid prolonged or repeated exposure. Keep away from ignition sources, heat and flame. Incompatibilities: strong.

Storage

Store in a cool, well-ventilated area. Keep away from ignition sources, heat and flame. Store in a tightly closed container. Incompatibilities: strong oxidizing agents and foods.

 

SECTION 8 EXPOSURE CONTROLS/PPE

                         

Engineering Controls: Safety shower and eye bath. Mechanical exhaust required.

Personal Protective Equipment:

Respiratory: Wear mask if necessary.

Eye: Chemical safety glasses.

Clothing: Wear appropriate protective clothing.

Hand: Safety gloves.

General Hygiene Measures: No smoking, drinking and eating at working site. Wash thoroughly after handling.

 

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

                         

APPEARANCE: Semi-Transparent

ODOR: Weak Odor

Flash POINT: 70°C(Closed cup)

Solubility: Slightly soluble in water, practically soluble in acetone and ethanol

 

 

SECTION 10 STABILITY AND REACTIVITY

                 

Stable: stable.

Materials to Avoid: Strong oxidizing agents.

Hazardous Polymerization: Will not occur.

Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide.

 

SECTION 11 TOXILOGICAL INFORMATIN

                   

Irritation Date: May irritate to eyes, skin and respiratory system.

Toxicity Date: No data available.

 

SECTION 12 ECOLOGICAL INFORMATION

                   

No data available.

 

SECTION 13 DISPOSAL CONSIDERATIONS


Appropriate Method of Disposal of substance:

Contact a lincensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with and afterburner and scrubber. Observe all federal, state, and local environmental regulations.

 

SECTION 14 TRANSPORT INFORMATION


DOT

Proper Shipping Name: None

Non-Hazardous for Transport: This substance is considered to be non-hazardous for transport.

LATA:

Non-Hazardous for Air Transport: Non-hazardous for air transport.

IMO:

Non-hazardous for Sea Transport: Non-hazardous for sea transport.

ADR/RID Class: None

Non-Hazardous for Transport: This substance is considered to be non-hazardous for transport.

IMO/IMDG is not regulated


SECTION 15 REGULATORY INFORMATION

EU Additional Classification:

  R36/38

Risk Statements: Irritating to eyes and skin:

  S36/37

Safety Statements: Wear Suitable protective clothing and gloves.

 

SECTION 16 OTHER INFORMATION

                      

Solvent is for use only in Limei ink, Do not use it for any ther purpose.

 

DATE: 13th Jan.2013

DEPARTMENT: Shanghai Research Institute of Chemical Industry Testing Center

Tel (Fax): 8621-52800971/52807275/52811034

REVISION: 0

OTHER INFORMATION

The MSDS is prepared in accordance with GB 16483-2000 General Rules for Preparation of Chemical Safety Data.

Sheet (eqv ISO 11014-1:1994)


  • sales004@yitewin.com
  • +86 20 2892 7647
  • +86 20 3764 8825 
  • Room 703, Liankai Building, No.623, Shatainan Road, Tianhe District, Guangzhou.
Follow Us

Copyright@YiTe(Guangzhou) Trade CO.,Ltd All Rights Reserved Sitemap